GRABO Pro is equipped with a robust vacuum pump. The foam rubber vacuum seal on the GRABO Pro tool is strong and resistant to loss of vacuum pressure. Once the pressure pump is activated, it creates a strong suction and firmly attaches to any non-porous flat surface. The suction is strong enough to hold firm even loads as heavy as 375 lbs . In order to lift any slab of flat solid material, simply turn on the unit and place it straight on the surface. The GRABO Pro automatically monitors the vacuum and if vacuum pressure is lost the pump is automatically powered up until the vacuum pressure is restored.
The GRABO Pro-Lifter is designed for professionals. Unlike the other gigantic solutions, the tool is portable and handy. Living up to the promise of “Heavy Lifting – Made Easy”, the GRABO Pro is equally effective on smooth as well as coarse surfaces. The Pro-Lifter has a pumping capacity of 20 liters per minute, a best in class. So, say good-bye to unreliable, and often dangerous, manual suction cups for the job. With GRABO Pro you double your work efficiency with enhanced safety.
The tool is ergonomically designed to provide better grip and less fatigue when moving heavy objects. The tool is an effective vacuum lifter even for dusty, semi-porous or rough surfaces. The tool works perfectly with glass, wood, ceramic tiles, metals and other materials. Just like the Classic version the powerful vacuum pump and rechargeable battery pack are concealed within the grab handle.
Lifting Capacity:
| Perpendicular Hold | Parallel Hold | |
|---|---|---|
| Glass | 375Lbs ( 170 kg ) | 265Lbs ( 120 kg ) |
| Ceramic Tiles | 375Lbs ( 170 kg ) | 265Lbs ( 120 kg ) |
| Metal | 242Lbs ( 110 kg ) | 242Lbs ( 110 kg ) |
| Plastic | 220Lbs ( 100 kg ) | 220Lbs ( 100 kg ) |
| Wood | 220Lbs ( 100 kg ) | 143Lbs ( 65 kg ) |
| Rough Slate | 176Lbs ( 80 kg ) | 176Lbs ( 80 kg ) |
| Rough Concrete | 176Lbs ( 80 kg ) | 176Lbs ( 80 kg ) |
| Dry Wall | 165Lbs ( 75 kg ) | 143Lbs ( 65 kg ) |
GRABO PRO-Lifter 20 The electric suction cup
Specifications:
VS
GRABO Comparison Chart
Model/SKU GRABO PRO-LIFTER 20 / GP-1Li-FB Battery 14.8VDC 2600mAh Li-ion Rated Power 16W Charger Input Voltage 100-240VAC 50/60Hz Battery Charging Time ~2hrs Non-Stop Running Time (Full Charge) 1.5hrs Running Cycles (On Full Charge) 900 ON-OFF cycles of 10 seconds Stand-by Mode (Charge Hold) 30 days Pump Service Life 100000+ ON-OFF cycles / 800+ hrs continuous Rated Air Flow 0.7cfm (20 L/min) Maximum Vacuum Rate 11.6Psi (0.8 Bar, 80 kPa) Maximum Lifting Capacity 375Lbs (170 kg) L x W x H 11.77 x 7.22 x 4.76” (300 x 184 x 121 mm) Net Weight (With Battery) 3.2Lbs ( 1.5 kg ) Working Temperature 32°F~140°F ( 0°~60 °C ) Applicable Surface Type Peak/valley heights less than 0.1” (3mm), arc less than 5° Additional Features Pump stops automatically at maximum vacuum rate ( 11.6Psi / 0.8 Bar )